测试开发技术网站

Docker----Docker容器跨网络互联

收藏本文

作者：redrose2100 类别：日期：2022-05-03 13:54:17 阅读：1050 次消耗积分：0 分

![](https://redrose2100.oss-cn-hangzhou.aliyuncs.com/img/06c9f19c-9517-11ee-b9ec-0242ac110004.png)

[TOC]

### （1）创建192.168.0.0网段的自定义网络
如下，指定网段为192.168.0.0/24，网关为192.168.0.1，网络类型为bridge，网络名称为mynet
```bash
docker network create --driver bridge --subnet 192.168.0.0/16 --gateway 192.168.0.1 mynet
```
创建后再次查看当前docker网络

```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker network list
NETWORK ID     NAME      DRIVER    SCOPE
9741ca08001e   bridge    bridge    local
405291d91242   host      host      local
5fea02b3963d   mynet     bridge    local
c07d37e1f457   none      null      local
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]#
```
### （2）创建名为centos1的docker容器，并指定网络为mynet
```bash
docker run -it --name centos1 --net mynet centos
```
如下为创建后并进入，查看ip

```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker run -it --name centos1 --net mynet centos
[root@e98a944fec1e /]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
217: eth0@if218: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:c0:a8:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.168.0.2/16 brd 192.168.255.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@e98a944fec1e /]#
```
### （3）创建名为centos2的docker容器，使用网络mynet
```bash
docker run -it --name centos2 --net mynet centos
```
如下，创建容器后进入并查看网络
```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker run -it --name centos2 --net mynet centos
[root@e4b7913e1581 /]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
219: eth0@if220: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:c0:a8:00:03 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.168.0.3/16 brd 192.168.255.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@e4b7913e1581 /]#
```

### （4）创建192.169.0.0网段的自定义网络
如下，指定网段为192.169.0.0/24，网关为192.169.0.1，网络类型为bridge，网络名称为mynet2
```bash
docker network create --driver bridge --subnet 192.169.0.0/16 --gateway 192.169.0.1 mynet2
```
创建后再次查看当前docker网络

```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker network list
NETWORK ID     NAME      DRIVER    SCOPE
9741ca08001e   bridge    bridge    local
405291d91242   host      host      local
5fea02b3963d   mynet     bridge    local
00cb484201d3   mynet2    bridge    local
c07d37e1f457   none      null      local
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]#
```
### （5）创建名为centos3的docker容器，并指定网络为mynet2
```bash
docker run -it --name centos3 --net mynet2 centos
```
如下为创建后并进入，查看ip

```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker run -it --name centos3 --net mynet2 centos
[root@41f0ebf82add /]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
226: eth0@if227: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:c0:a9:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.169.0.2/16 brd 192.169.255.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@41f0ebf82add /]#
```
### （6）创建名为centos4的docker容器，使用网络mynet2
```bash
docker run -it --name centos4 --net mynet2 centos
```
如下，创建容器后进入并查看网络
```bash
[root@iZbp1flzt6x7pxmxfhmxeeZ ~]# docker run -it --name centos4 --net mynet2 centos
[root@6d94db61d337 /]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
228: eth0@if229: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:c0:a9:00:03 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.169.0.3/16 brd 192.169.255.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@6d94db61d337 /]#
```
### （7）验证网络联通性
* 此时创建好的centos1和centos2在192.168.0.0网络里，centos3和centos4在192.169.0.0的网络里
* 可以验证centos1中可以ping通centos2，但是无法和centos3容器ping通

```bash
[root@e98a944fec1e /]# ping centos2 -c 3
PING centos2 (192.168.0.3) 56(84) bytes of data.
64 bytes from centos2.mynet (192.168.0.3): icmp_seq=1 ttl=64 time=0.043 ms
64 bytes from centos2.mynet (192.168.0.3): icmp_seq=2 ttl=64 time=0.077 ms
64 bytes from centos2.mynet (192.168.0.3): icmp_seq=3 ttl=64 time=0.065 ms

--- centos2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.043/0.061/0.077/0.016 ms
[root@e98a944fec1e /]# ping centos3 -c 3
ping: centos3: Name or service not known
[root@e98a944fec1e /]#
```
* 此时做到了centos1centos2 和centos3 centos3的隔离

### （8）实现跨网络的容器互联
如下，设置将容器centos1与mynet2联通，此时centos1将可以与mynet2下所有的docker容器联通
```bash
docker network connect mynet2 centos1
```
如下，可以验证，centos1已经可以与mynet2网络下的centos3和centos4联通
```bash
[root@e98a944fec1e /]# ping centos3 -c 3
PING centos3 (192.169.0.2) 56(84) bytes of data.
64 bytes from centos3.mynet2 (192.169.0.2): icmp_seq=1 ttl=64 time=0.063 ms
64 bytes from centos3.mynet2 (192.169.0.2): icmp_seq=2 ttl=64 time=0.064 ms
64 bytes from centos3.mynet2 (192.169.0.2): icmp_seq=3 ttl=64 time=0.066 ms

--- centos3 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.063/0.064/0.066/0.006 ms
[root@e98a944fec1e /]#
[root@e98a944fec1e /]# ping centos4 -c 3
PING centos4 (192.169.0.3) 56(84) bytes of data.
64 bytes from centos4.mynet2 (192.169.0.3): icmp_seq=1 ttl=64 time=0.080 ms
64 bytes from centos4.mynet2 (192.169.0.3): icmp_seq=2 ttl=64 time=0.062 ms
64 bytes from centos4.mynet2 (192.169.0.3): icmp_seq=3 ttl=64 time=0.066 ms

--- centos4 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.062/0.069/0.080/0.010 ms
[root@e98a944fec1e /]#
```
如下可以验证，此时centos2仍然与mynet2下的centos3和centos4不通
```bash
[root@e4b7913e1581 /]# ping centos3 -c 3
ping: centos3: Name or service not known
[root@e4b7913e1581 /]# ping centos4 -c 3
ping: centos4: Name or service not known
[root@e4b7913e1581 /]#
```

始终坚持开源开放共享精神，同时感谢您的充电鼓励和支持！

个人成就

出版书籍

《Pytest企业级应用实战》

测试开发技术全栈公众号

测试开发技术全栈公众号

DevOps技术交流微信群

加微信邀请进群

常用网站链接

文章分类

最新文章

最多阅读

特别推荐

版权所有 © devops-dev.com (2021-2023)

苏公网安备32011502011999

苏ICP备2021008941号-2

友情链接

CSDN Github Gitee

联系我们

北京★北京市中关村微信：redrose2100
邮箱：hitredrose@163.com